Published at Tuesday, May 15th, 2018 - 06:15:13 AM. Kitchen Cabinet Doors. By Zdzislawa.
Excerpt from The Art of DIY Refacing of Kitchen Cabinet Doors and Drawers Fronts :
To start refacing, begin with the frames. Do each section of frame on its own. Using a razor knife, you will cut the veneer to fit each piece. Make sure to measure carefully. To cover the surface, pull back a little of the backing paper and press snugly into place. Work slowly and carefully to make all edges match. When you've finished with the frames, you can use the same process on doors and drawer fronts. Whether or not you cover door interiors is up to you. You can find pictures online that will assist you in putting the veneer on correctly.
After you've removed everything from the cabinet frames, you need to prepare the wood surfaces. Start by pulling off any loose finish, and then sand lightly to remove smaller flakes and scratches. Don't sand too much in any one area, because you'll make a noticeable depression in the wood. You also don't want to sand down to the bare wood, because self-adhesive veneers are designed to be used on top of existing finishes and won't adhere well to unfinished wood.
Any content, trademark’s, or other material that might be found on the EPRESSRELEASES website that is not EPRESSRELEASES’s property remains the copyright of its respective owner/s. In no way does EPRESSRELEASES claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.